Select Page
Projects

BIOSUSSET

Development of safe and sustainable methods to produce polyurethane and epoxy thermosets from bio-based sorbitol and isosorbide based precursors

Budget
7.634.395.58 €
Duration
Start date:
01/06/2026
End date:
31/05/2030
Beneficiaries
Agencia Estatal Consejo Superior de Investigaciones Científicas, Teknologian Tutkimuskeskus VTT Oy, Bio Base Europe Pilot Plant VZW, Specific Polymers, VEGEA Srl, Manufacture Française des pneumatiques Michelin, Instituto de Soldadura e Qualidade, Pollution Srl, Asociación Española de Normalización, Enco Srl, University of Warwick, Gr3n Recycling, Technical University of Darmstadt.
SDG

AIMPLAS is aligned in this project with the following Sustainable Development Goals (SDGs).

Web del proyecto

Objectives

The main objective is to develop novel sustainable thermoset PU and epoxy resins with high bio-based constituent (bio-based sorbitol and isosorbide derivatives) sourced from agrifood waste (fruit feedstock).
At the same time, BIOSUSSET will innovate in the removal and substitution of hazardous chemicals used on the thermoset resins production with the following strategies:

1) BPA and ECH will be removed from epoxy synthesis route and substituted by epoxidized sorbitol and isosorbide derivatives, 5-hydroxylmethyl furfural (5-HMF) and vanillin;

2) Sustainable PUs will be produced by the reaction of bio-based sorbitol containing polyols and low toxicity isocyanates;

3) NIPUs route (non-isocyanate polyurethanes) by the polymerization of bio-based isosorbide carbonates. All these strategies are focused on reducing risks towards humans and environment, by using chemicals with less aquatic toxicity and decreasing VOC emissions during synthesis process that will minimize the occupational exposure hazards.

Description

BIOSUSSET seeks to obtain bio-based building blocks through environmentally friendly processes (pressurized hot water extraction & filtration for polysaccharides isolation from fruit waste, mechanochemistry
for production of sugars, magnetic induction for conversion of sugars into sorbitol/isosorbide) to enhance the sustainability of thermoset resins such as epoxies and polyurethanes (PUs), thereby improving their end-of-life management and ensuring human and environmental health. The project is introducing innovative green technologies to reduce the uses of solvents and energy while providing a source of non-toxic precursors for thermosets industry.

BIOSUSSET logo

Funding

Horizon Europe – Cluster 4: Digital, Industry and Space
Aeronautics
Agriculture
Automotive and Transport
Construction
Energy
Furniture
Raw materials
Recycling
Advanced technologies
Sustainable materials
European
09. Industria, innovación e infraestructura
12. Producción y consumo responsables
13. Acción por el clima
Coatings
Composites
Mecanochemistry
Polymer synthesis
Recycling
Synthesis