Characterisation of materials for hydrogen technologies
The development of materials for hydrogen production, separation and storage requires specific characterisation techniques to evaluate their functional behaviour, stability and performance.
At AIMPLAS, we offer a range of tests and characterisation capabilities for materials used in hydrogen technologies, including membranes, electrodes, adsorbent materials and materials for high-pressure storage and cryogenic applications.
What hydrogen materials do we evaluate?
At AIMPLAS, we work with materials for different applications across the hydrogen value chain:
- Membranes for PEM and AEM electrolysis.
- Electrodes for electrochemical technologies.
- Materials for high-temperature technologies.
- Tanks and reinforcements for type IV and V tanks.
- Foams for cryogenic insulation and liquid hydrogen.
- Adsorbent materials for solid-state storage.
What characterisation services do we offer at AIMPLAS?
Gas permeability characterisation
We carry out permeability tests on membranes and polymeric materials using custom gas mixtures, with a system connected to gas chromatography for analysis of the gas composition at the outlet.

Applications:
- PEM and AEM membranes.
- Gas separation.
- Type IV and V tanks.
- Tapes and composites for reinforcement.
- Foams for liquid hydrogen.
Capabilities:
- Tests at constant pressure or continuous flow.
- Gas mixtures with H₂, CO₂, CH₄ and N₂.
- Analysis connected to gas chromatography.
- Maximum flow of 250 mL/min.
- Module pressure of up to 4 bar.
- Measurement pressure of up to 2 bar.
Hydrogen adsorption characterisation
We offer hydrogen adsorption tests to evaluate storage and separation materials.

Static adsorption:

- Low-pressure tests. T(°C) = −196 to 100. P (bar) = 0.0005–1
- High-pressure tests. T(°C) = −196 to 500. P (bar) = 0.0005–500
- Evaluation of storage capacity.
- Acquisition of adsorption isotherms.
Dynamic adsorption and pressure swing adsorption (PSA):

- Dynamic tests using PSA.
- Evaluation of hydrogen separation and purification.
- Adsorption/desorption studies.
- Validation of adsorbent materials.
Materials evaluated:
- MOFs.
- Zeolites.
- Activated carbons.
- Polymeric materials.
Electrochemical and physicochemical characterisation of membranes
We carry out tests to evaluate the behaviour of membranes used in PEM, AEM and other electrochemical applications.

Tests available:
- Water uptake.
- Swelling degree.
- Ionic conductivity and ohmic resistance.
- Ion exchange capacity (IEC).
- Gas crossover/permeability.
- Stability and ageing studies.
Applications:
- PEM membranes.
- AEM membranes.
- Separators and composite membranes.
- Electrodes and electrochemical components.
Thermal conductivity characterisation of insulating materials
We carry out thermal conductivity tests on materials used for insulation in hydrogen technologies, particularly in cryogenic applications such as liquid hydrogen storage.

Applications:
- Foams for liquid hydrogen insulation.
- Cryogenic storage systems.
- Type IV and V tanks.
Capabilities:
- Determination of thermal conductivity as a function of temperature.
- Evaluation of insulating behaviour under representative operating conditions.
Ageing tests and mechanical property evaluation
We evaluate the durability and stability of materials through ageing tests under controlled conditions, followed by characterisation of their mechanical properties.
Ageing tests:
- Thermal ageing.
- Environmental ageing (humidity, thermal cycling).
- Exposure to relevant gases (H₂, NH₃, etc.).
Further evaluation:
- Mechanical tests (tensile, compression, flexion).
- Analysis of property loss.
- Evaluation of structural integrity and service life.
Applications:
- Hydrogen storage and distribution components.
AIMPLAS and the development of materials for hydrogen
At AIMPLAS, we participate in national and European projects related to hydrogen, decarbonisation and sustainable fuels. Our characterisation capabilities enable materials to be validated under representative conditions and accelerate the development of new solutions for hydrogen production, separation and storage.
Membranes, polymeric materials, composites, foams, adsorbents and other materials used in hydrogen technologies.
Yes. Our equipment can work with different gas mixtures tailored to each application.
Primarily PEM and AEM membranes, although other functional membranes and separators can also be evaluated.
