High Degree of Purity, NIAS and DoC: Regulation 2025/351
ERegulation (EU) 2025/351 amends Regulation 10/2011 on plastic materials and articles intended to come into contact with food and introduces the concept of a high degree of purity. This requires manufacturers to know the actual composition of raw materials, including NIAS, and to provide more information in the Declaration of Compliance. This article explains what each change entails and what steps companies need to take.
The changes introduced by Regulation (EU) 2025/351 reinforce the need to better understand the composition of the raw materials used and to ensure that information is properly communicated throughout the entire supply chain.
High degree of purity: what is the new approach to the composition of substances?
One of the main changes introduced by the Regulation is the establishment of a specific definition of high degree of purity for substances used in the manufacture of plastic materials intended to come into contact with food.
It is not a requirement for the complete absence of impurities. Instead, the legislation requires manufacturers to have an adequate understanding of the composition of the substances used and to demonstrate that any components present, including those not intentionally added, do not compromise the safety of the final material.
What are the implications of this change?
This means moving from:
It is no longer sufficient to know which substances are used; it is also necessary to understand which impurities, reaction products or degradation products may accompany them and whether their presence is compatible with food safety requirements.
For this reason, the concept of a high degree of purity is closely linked to the characterisation of raw materials, the identification of relevant substances and the assessment of the risks associated with their potential migration into food.
NIAS: an increasingly relevant issue
NIAS (Non-Intentionally Added Substances) are substances present in a material without having been deliberately added as part of its final formulation.
They may come from different sources:
The presence of a NIAS does not necessarily mean that there is a regulatory non-compliance. What is important is to know which substances may be present, in what quantities and whether they may affect the safety of the final material.
In this context, the new Article 3a incorporates NIAS into the assessment of a high degree of purity, reinforcing the need to have sufficient information about the composition of raw materials and the substances that may be generated during manufacturing.
What changes in the technical documentation and Declaration of Compliance (DoC)?
In addition to introducing new composition criteria, the Regulation reinforces the importance of the documentation supporting the compliance of materials.
On the one hand, the update to Article 16 establishes that companies must be able to demonstrate compliance with the Regulation through appropriate documentation and, in particular, provide information on the composition and degree of purity of the substances used.
On the other hand, point 6 of Annex IV to Regulation (EU) No 10/2011, which regulates the information to be included in the DoC, has been amended. From now on, it must include more information so that each operator, from the raw material manufacturer to the final producer, has all the data necessary to ensure compliance with the applicable safety requirements.
What is the main change to the DoC?
As a major change, in addition to providing information on substances subject to restrictions and/or specifications, certain non-intentionally added substances, such as impurities or degradation products, must also be reported when they may affect the conformity of the final material. In the case of intermediate manufacturing products, the identification and quantity of substances subject to restrictions and/or specifications under Annex II must be included and, under certain circumstances, those whose genotoxicity could not be ruled out.
For this reason, communication between suppliers, raw material manufacturers, processors and manufacturers of finished articles will be more important than ever. The DoC therefore becomes a key tool for information traceability and risk assessment throughout the entire supply chain.
What should companies do to adapt to Regulation 2025/351?
Adapting to the Regulation requires more active management of the technical information available on materials and processes. The main recommended actions include:
Obtain more information about raw materials
Companies need to have a better understanding of the identity, composition, purity and relevant impurities of the substances used. In some cases, it will be necessary to request additional information from suppliers or update existing documentation.
Identify potential sources of NIAS
It is advisable to analyse which substances may be generated from raw materials or during the different stages of the production process, including potential reaction or degradation products.
Assess the associated risks
Substances identified as potentially relevant must be assessed to determine whether they may affect the safety or conformity of the final material.
Generate supporting documentation
Compliance must be based on sufficient technical evidence to substantiate both the assessment carried out and the conclusions reached.
Update Declarations of Compliance
Companies must review their DoC templates and the information they provide to their customers to ensure that they comply with the new requirements of Annex IV.
Strengthen communication throughout the supply chain
Safety and compliance increasingly depend on the quality of the information communicated between all the operators involved.
Key aspects of Regulation 2025/351 for the supply chain
Regulation (EU) 2025/351 strengthens the approach to quality control and safety assessment of plastic materials intended to come into contact with food. The introduction of the concept of a high degree of purity broadens the focus from the main substance to understanding the actual composition of raw materials, while the amendment to point 6 of Annex IV improves the information that must be communicated throughout the supply chain.
For companies, the main challenge will be to have sufficient information on raw materials, impurities and manufacturing processes, as well as to maintain robust documentation that can demonstrate material compliance. Rather than being a new documentary obligation, this amendment represents a step towards greater transparency, traceability and knowledge of materials used in food contact applications.
How can AIMPLAS help?
To help companies comply with the regulations and ensure the safety of their products, AIMPLAS offers a comprehensive service covering everything from the detection and identification of NIAS using advanced chromatographic techniques, together with the corresponding risk assessment, to consultancy on all matters relating to the DoC.
Frequently Asked Questions
No. Regulation (EU) 2025/351 does not require the total absence of impurities, but rather that the manufacturer knows the actual composition of the substance. It must also be able to demonstrate that no component present compromises the safety of the final material.
Companies must be able to demonstrate compliance with appropriate documentation, including information on the composition and degree of purity of the substances they use. It is no longer enough to state that a material complies: it must be possible to justify it.
The identity and quantity of the substances subject to restrictions or specifications in Annex II. In certain circumstances, it must also include substances whose genotoxicity could not be ruled out.
Data on the identity, composition, purity and relevant impurities of each substance. In many cases, it will be necessary to request additional information or update existing documentation in order to justify the high degree of purity.