The entry into force of the PPWR doubles enquiries to AIMPLAS as companies seek clarification
AIMPLAS has already handled more than 200 enquiries so far this year relating to the new European Packaging and Packaging Waste Regulation (PPWR), a figure that is almost double the number recorded over the same period last year as a result of the Regulation becoming applicable on 12 August.
At present, between 50% and 60% of the enquiries received by the Food Contact & Packaging department relate to this Regulation. Most of them stem from a lack of familiarity with some of the requirements set out in the legislation and, in particular, from uncertainty over who must demonstrate compliance and which materials or types of packaging it applies to.
The PPWR sets new limits for per- and polyfluoroalkyl substances (PFAS) in food contact packaging. From 12 August, manufacturers, converters, packers, importers and brands will have to demonstrate that their packaging complies with the new requirements through technical documentation and, where necessary, testing of the final product.
Against this backdrop, Joan Borras, Lead Researcher at the Food Contact & Packaging Laboratory, explained that “so far this year we have already handled more than 200 enquiries relating to the new Regulation and, compared with last year, the number has almost doubled. Most of them concern how to interpret the new requirements, what documentation must be provided and who is responsible for demonstrating compliance with the legislation before it becomes applicable”.
Packaging for fatty or moist foods among the most affected by the PPWR
The main challenges are expected to arise in packaging designed to resist grease, water or moisture, such as certain food-grade papers and boards, moulded cellulose packaging, wrappers for prepared foods, baked goods, snacks or takeaway products. Multilayer packaging and packaging incorporating functional coatings may also be particularly affected.
To adapt to the Regulation, companies will need to review the entire supply chain, gain a better understanding of the composition of their materials and identify the source of PFAS, whether they come from a coating, ink, adhesive or raw material. Where a problem is identified, it will be necessary to seek alternatives and validate that the new packaging continues to provide the performance required to protect the food.
In some cases, particularly for paper and board packaging, adaptation may involve introducing new barrier coatings made from plastic materials to meet the new requirements without compromising packaging functionality.
Packaging could also change for consumers
Replacing PFAS could result in visible changes to some food packaging, particularly paper or board packaging intended for fatty or moist foods. Consumers may encounter materials with a different feel, finish or composition.
In some cases, these changes could involve the introduction of new barrier coatings or changes to the thickness, protective layers or format of the packaging in order to maintain food safety and shelf life.
All of this entails reformulation, testing and supplier approval costs, so there could be some impact on the price of certain types of packaging, although it is not yet possible to quantify this.
“The application of these limits does not only introduce a new analytical requirement. It also entails an in-depth review of materials, suppliers and packaging designs, with potential effects for both industry and consumers”, Borras concluded.
Initial results are positive, although testing is continuing
The first fluorine analyses carried out by AIMPLAS are, for the time being, producing positive results: fewer than 1% of samples have exceeded the established legal limit. However, when packaging produces certain results, the study must be completed with additional analyses before compliance with the legislation can be confirmed. It is therefore still too early to draw conclusions, and it will be necessary to wait until the end of the year to obtain a more complete picture.