Quality control of polymers and plastic products

Depending on their use and industry of application, plastic materials and products must comply with the relevant industry specifications and requirements. Quality control procedures are applied to assess compliance based on a series of laboratory tests and analyses.

Featured posts on Quality control of polymers and plastic products

Viscosity of polymers in solution

The measurement of the viscosity of polymer solutions in organic solvents gives us a value that is directly related to the molecular mass of the polymer. In other words, the higher the viscosity, the higher the molecular weight, although the correlation is not direct.

Analysis of PET bottles intended for beer packaging

Since the implementation of the injection-blowing processes, polyethylene terephthalate (PET) bottles are present in a wide variety of packages in different sectors, such as the […]

Weathering testing: plastics and ageing

Weathering testing and ageing testing help us to predict how our plastic products are going to withstand over time.

Testing conditions for overall and specific migration test for packaging

Overall migration testing The Regulation nº 10/2011 establishes nine possible testing conditions which cover all applications regarding overall migration. In the most common use, in […]

Permeability and plastic packaging

When we say that a material or packaging has a particular gas permeability, for instance oxygen, it gives us an idea of the amount of […]

All post on Quality control of polymers and plastic products

Now accredited for emissions testing using the one cubic-metre chamber method, AIMPLAS expands its testing capacities to include emissions from plastic materials in vehicle interiors

AIMPLAS has expanded the scope of its testing accreditation for the automotive industry by including the one cubic-metre chamber emission method.

AIMPLAS accredited for series of tests to enable plastic exports to meet Basel Convention requirements

The Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal is a multilateral environmental treaty that mainly involves hazardous waste. […]

AIMPLAS expands their laboratory equipment with a camera to conduct adherence tests according to standard UNE EN ISO 16925

The evaluation of the painted parts’ coating properties in the automotive sector is outlined in the standards issued by the OEMs themselves. In the case of Volkswagen

Viscosity of polymers in solution

Behaviour and compliance of thermoplastic and GFRP pipes

The pipes transport solids, liquids and gases that may be aggressive to the material they are made of. They are also used in different environments and can be buried, used outdoors